Dingo E-Z LS Conversion Mounts

Precision CNC water-jet cut from .250 plate steel. These Patented Design ;motor mounts are for installing the 1999-2012 Gen III/IV LS series engine into older 1973-1997 GM cars. They are slotted for adjustment with engine placement in the engine compartment. These mounts will allow you to move the engine from the original bell housing position up to 2 1/2 inches forward, and up to 1/2 inch rearward. Welded and cooled in a jig to retain precision alignment. These conversion mounts fit over the factory frame mounted engine mounts. May require using aftermarket oil pan. Grade-8 hardware included.

These mounts will clear low mount a/c but will not allow the engine to slide back, they mount against the a/c compressor bracket. They will clear low mount alternator but the amount of adjustment is limited.

See application chart here.

Black texture powder coat is available
DD-LS-EZ-1

Leave a Reply

You must be logged in to post a comment.