These Dirty Dingo Motorsports mounts are the "Ford Upgrade" conversion engine mounts. These Patented Design motor mounts are for installing the 1997-2013 Gen III/IV LS series engine into 1996-2004 Ford Mustangs. Ford Upgrade mounts give up to 2” of adjustment, 1" forward and 1" rearward from standard location. You can use any 4.6 Ford motor mount designed for your 1996-2004 Mustang- factory rubber engine mounts, aftermarket urethane or aftermarket solid engine mounts. Precision CNC water-jet cut from .250 plate steel. These mounts allow the use of a LS truck oil pan but it hangs below the K-Member. We recommend using an F-body Camaro oil pan for ground clearance on rear sump. Grade-8 hardware included. Engine mount in pictures is not included.
INSTALLATION INSTRUCTIONS
* (raw steel not painted) Black texture powder coat is available.
* Will not fit DART aftermarket blocks.
* These mounts will clear low mount a/c but will not allow the engine to slide back, they mount against the a/c compressor bracket. They will clear low mount alternators.
Current Reviews: 1
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.
STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.
