Precision CNC laser cut and CNC folded from .250 cold roll plate steel. These Patented Design engine mounts are for installing the 1997-2013 Gen III/IV LS series engine into any street rod or hot rod frame configuration. They are slotted for front to back adjustment with engine placement in the engine compartment. Most engine mounts only allow you to position the engine in one location, not allowing you to change transmissions in the future without major reconstruction of the transmission cross member. Our mounts will allow you to move the engine forward or rearward with up to 3 inches of travel. 

These are offered as just the engine mounts, or a complete engine mount package. The isolators in the mount package are hyper-flex polyurethane. Designed with adjustable holes in the engine mounts and the frame mounts. The frame side mount can be trimmed up to an inch per side allowing these to fit chassis from 19.125" to 26.75" inside frame width.

* (raw steel not painted) Black texture powder coat is available.

* Sold as a pair, grade-8 hardware included.

* Welded and cooled in a jig to retain precision alignment.

* Will not fit DART aftermarket blocks.

* These mounts will not clear low mount a/c. They will clear low mount alternator but the amount of adjustment is limited.

Also can be welded into-

• Jeep CJ10 (81-85)
• Jeep CJ5 (72-86)
• Jeep CJ6 (72-75)
• Jeep CJ7 (76-86)
• Jeep CJ8 (81-86)
• Jeep Grand Wagoneer (72-84)
• Jeep J series Truck (81-85)
• Jeep SJ Cherokee (72-84)
• Jeep Wagoneer (72-84)
• Jeep Willys Wagon (46-65)
• Jeep YJ (87-95)
• Toyota Land Cruiser FJ40 (63-84)
• Toyota Land Cruiser FJ55 (67-80)
• Toyota Land Cruiser FJ60 (81-87)
• Toyota Land Cruiser FJ62 (88-90)

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.