This item is an oversized item and additional shipping charges will apply.

Brand New OE real Sanden 7176 SD7B10 mini A/C compressor with a six groove serpentine clutch. The compressor is full of PAG oil, 3.4 oz SP-10, designed to be used with 134A freon. The output of this compressor is 100CC or 6.10CID.

Billet fitting for the Sanden SD7B10 compressor HERE.

* Overall length with the clutch: 7"

* Overall height: 6-3/4"

* Horizontal mounting ear distance: Inside 2-1/4" outside 3-3/4"

* The compressor requires adapter fittings."

• * Can Use R12 If Oil Is Changed

Replacement O-ring part numbers

Discharge: MT0262       Suction: MT0304

Warranty-

Compressors come with a one year warranty from the manufacturer. If you need to return a compressor for a warranty, we have to return it to the manufacturer to get it tested and this may take several weeks. The manufacturer will determine if it was installed and oiled correctly. You will be responsible for all shipping costs. 

When a compressor fails, it often floods the A/C system with debris. If certain parts (the orifice tube/expansion valve and drier/accumulator) are not replaced and a full system flush is not performed when installing a replacement compressor, even the best new compressor may not perform properly. For this reason, it is important to clear the system of debris and replace all of the parts that were compromised when the first compressor failed. Because improper installation leads to compressor damage, the warranty terms on A/C compressors are very specific and the warranty is valid only if it was installed correctly. It's the responsibility of the customer to check the oil capacity on all compressors.  We highly recommend draining the oil and adding the correct PAG oil viscosity and appropriate volume for the application.  We will not warranty any compressor installed without proof of installation/drier and metering device.  Condenser required on some compressors. The Sanden 508 model 4711 requires 4.5 fl.oz. of SP-15. The Mini Sanden Model 7D7B10 7176 requires 3.4 fl.oz. of SP-10. Please follow all local, state and federal regulations when servicing mobile A/C systems.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.