Dirty Dingo passenger side low mount A/C bracket kit. This is a complete bracket kit for installing the Sanden SD7B10 mini compressor on the lower passenger side of LS engines. Laser cut and CNC bent from .250 cold roll plate steel. Black texture powder coated and includes CNC lathe cut 6061-T6 billet aluminum spacers and grade 8 zinc coated bolts. Includes belt tensioner. This places the compressor as tight as you can get to the block and runs on the inside 4 rib belt. Will work with LS Truck, Camaro/Firebird/GTO and Gen 3/4 Corvette accessory spacing. Will fit all Gen III and Gen IV 1997-2015 LS engines. From the center of the crank to the furthest outside point measures 10 5/8 inches.

* Belt not included, please see installation instructions below for the correct belt size for your application.

Installation Instructions

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.