This is a factory replacement low mount alternator bracket for the F car 1998-02 camaro accessories that fits Vortec Truck and 2010-15 Camaro VVT accessory spacing. This bracket comes with the additional idler pulley required. Machined from 3/8 thick 6061-T6 billet aluminum. Kit includes grade 8 zinc coated bolts, 6061-T6 precision CNC lathe cutbillet aluminum spacers, snd stainless washers. Designed to be used with 1998-02 Camaro alternator using the facory rear alternator brace. Includes CNC machined 6061-T6 billet rear alternator brace.

* Can be used with Vortec truck blocks by drilling the upper hole into the block. This should be drilled with a .339 drill bit 3/4" deep and tapped with a 10MMx1.5 tap. Truck accessories only use two bolts that mount through the alternator into the block and teh billet rear brace.

* When used with our LS1 style high mount power steering bracket uses Gates belt K060790

* Designed to fit alternators from- 1996-99 Chevy truck 350-454 (provides the most rear clearance), 1998-2002 Camaro, Firebird, and 2004-06 GTO.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.