Dirty Dingo designed billet aluminum alternator/power steering and Sanden 508 brackets for your Gen V engine with Truck spacing balancer. CNC machined from 1/2" thick 6061-T6 aircraft billet aluminum on a precision vertical CNC milling center. This bracket is completely machined on both sides to 3/8" thick. Designed to be used with Dirty Dingo LT water pump adapters and used with a Gen IV LS water pump. This bracket uses a type 1 power steering pump from a 1990-1995 Chevrolet truck. Bracket is double drilled to mount all Gen III and Gen IV large and small case alternators. Can be used with a stock diameter LS truck or a small diameter 5” power steering pulley. Idler pulleys, tensioner, and grade 8 zinc coated allen bolts included. Billet spacers are cut on a CNC lathe for precision. This kit does not include the small billet power steering pulley. Total width of brackets are 34.75". From the center of the engine the alternator is 18 1/4" wide, the A/C is 16 1/2" wide.
* Will not work with dry sump engines.
* Designed to be used with Sanden type SD7H15 4711, 4665, and 6669 508 A/C compressors
* Must be used with DD-LT-WPA Dirty Dingo LT water pump adapters and a Gen IV 2008 LS3 6.2L Corvette water pump GM part number 89018052.
* Designed to fit all LS alternators- 1998-2002 Camaro, 2000-2013 Truck LS Vortec truck large and small case, 2010-2015 Camaro, and LT truck alternators.
* Designed to fit 1990-95 Chevrolet 1500 truck power steering pump.
* Billet small diameter power steering pulley LS Vortec Truck pump- DD-LS-SPS-B-TR.
* Can be used with a 7, or 8 rib clutch Sanden 508 compressor.
* Will not clear factory truck vacuum pump. Hydroboost or electric vacuum pump required.
* Designed to fit using Gen V Truck spacing harmonic balancer GM part number 12620312.
* LT 2 pin plug alternator Duralast DL1912-6-11, AC Delco 20881337, ADR0373.
This is a heavy item and its weight is 16.00 lb(s)
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.
STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.
