Precision CNC laser cut from .250 cold roll plate steel. These engine mounts are for installing the 2014-2022 Gen V LT series engine into any street rod or hot rod frame configuration. They are slotted for 3 inches of front to back adjustment with engine placement in the engine compartment. Most engine mounts only allow you to position the engine in one location, not allowing you to change transmissions in the future without major reconstruction of the transmission cross member. Our mounts will allow you to move the engine forward or rearward with up to 3 inches of travel. Includes urethane isolators in the mount kit. Frame side tabs can be cut to fit any chassis.

* Sold as a pair, grade-8 hardware included.

* (raw steel not painted) Black texture powder coat is available. For welding purposes frame side parts will not be powder coated.

* These mounts will not clear low mount a/c. They will clear low mount alternator but the amount of adjustment is limited.

* Featured on Hot Rod Garage; Season 7, Episode 76.

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

ALUMINUM: Most of the aluminum alloys used today contain some level of lead, usually less than .1%. Lead is known to the state of California to cause cancer and reproductive harm. Most aluminum alloys are physiologically inert in their solid form, and the lead is contained within, however user-generated dust and/or fumes may pose a hazard if inhaled or ingested. Heating beyond a certain temperature may also provide avenues for exposure.

STEEL (steel bolts): Steel is an iron alloy with several metals including Nickel and Chromium. Both Nickel and Chromium are known to the State of California to cause cancer and reproductive harm, respectfully. This warning applies to stainless steels as well.