All threaded holes in the block and cylinder head should cleaned and tapped with a thread chaser. All bolts being installed should be lubed with a light oil or anti-seize on the bolt threads before assembly.

Install the three spacers under the bracket onto the driver's side front cylinder head as shown. Torque bolts to 28 ft lbs.

Install the 1998-02 Camaro power steering pump using the two 8mm bolts as shown. Torque bolts to 12 ft lbs.

Install the 1998-02 Camaro or our Dirty Dingo billet aluminum power steering pump pulley designed for 1998-02 Camaro using the proper installation tool.