|
Close fit LS1 Camaro style alternator and power steering bracket. CNC machined from 1/2" thick 6061-T6 aircraft billet aluminum on a precision vertical CNC milling center, completely CNC machined on both sides to 3/8 thickness. This bracket fits Vortec Truck accessory spacing and raises the 1998-02 Camaro power steering pump and reservoir up 2 1/4 inches and moves the pump in 2 inches closer to the center of the engine for more clearance with forward facing turbo headers. Double drilled to also fit Howe's high volume race pumps. Requires drilling the block and using a 1998-02 Camaro alternator. Includes additional idler pulley, precision 6061-T6 billet CNC lathe cut spacers, grade 8 zinc coated allen bolts, and stainless steel washers. Will fit all Gen 3 and Gen 4 LS engines.
* Designed to be used with 1998-02 Camaro Power steering pump, reservoir, and pulley.
* Will not fit GTO, Corvette, or Truck Power steering pumps or pulleys.
* Can be used with Vortec truck blocks by drilling the upper hole into the block. This should be drilled with a .339 drill bit 3/4" deep and tapped with a 10MMx1.5 tap. Truck accessories only use two bolts that mount through the alternator into the block and the billet rear brace must be used.
* With low mount alternator and stock Camaro tensioner Gates K060815 belt.
* Designed to fit alternators from- 1996-99 Chevy truck 350-454 (provides the most rear clearance), 1998-2002 Camaro, Firebird, and 2004-06 GTO.
Low Mount Alternator Installation Instructions
|
